I currently have a USB modem to broadband. I bought a wireless router, the Ethernet ports. Currently, the modem in my downstairs computer which is connected with Windows 98, so it will bridge the connection to my computer upstairs (XP). I can not upgrade to XP because a family member "risk" is used.
Can I use the USB modem broadband that is, to my wireless router with a selection of cables to USB Ethernet adapters difficult to find (I can not to a USB portFor Ethernet). If this is not possible if I connect the USB modem to my XP computer, I connect a bridge to my Win 98 computer with the XP machine as a host?
Alltel Wireless Cell Phones
I think that it is not their current Ethernet to USB, but USB to Ethernet. I see no reason why you should be able to connect the USB modem to the XP computer and use it as a bridge to the computer 98.
Of course it would be nice to have an all-in-one, but you can reach your goalwith this device. You can not convert to the USB adapter cable into the Ethernet modem. USB drivers need to use Ethernet connections, and do not provide these drivers for the device. You could also connect the modem to the XP machine and bridge connections, yes. but you can leave the system as it is, and set the smooth flow as follows:
If I had the hardwear in front of me, it would be easier to provide special ... But I can probly give you an idea of what to do.There are only 2 steps here:
1 Configuring an Internet gateway.
2 Configuration of the router.
And the rest is easy.
1 Set the machine for a connection to the Internet (you can use the wizard, if you want, or simply to turn on Internet Connection Sharing), which turns 98 in a SHARE Internet gateway. leading needs an IP address designated, however. In essence, the 98-machine, the Internet server, so that the machine's IP-98 is the gateway IP. Assignan address, for example: 192.168.1.1 to-98 machine. The "192,168" is important, and the last threads that can stretch, but for the sake of simplicity can keep them low. * TIP * Always the subnet mask of 255.255.255.0. OK, that takes care of the host machine.
2 after you have an Internet gateway, connect the wireless router and the console (or IP) in the settings, usually coming in Internet Explorer and type 192.168.0.1 into the address bar, and look for a slotInternet gateway. Enter the address assigned in step 1. namely, that for the router. (There may be other settings that you need a specific network, and if there is, you configure them.)
Finally, a couple of cleaning. ensure that the working group is the same for both machines. I usually use MSHOME workgroup. Also, make sure the XP machine, your IP address is set to "Obtain IP address automatically", also known as DHCP.
To connect a USB modem Ethernet Router